Menu
Cart 0

E3D V6 PT100 Total Hotend Upgrade Kit

  • $ 41.99


PT100's are  high temperature, high accuracy temperature sensors that you can now on your E3D-v6 HotEnd instead of a thermistor or thermocouple. PT100's are able to measure higher temperatures than thermistors - upto 400C, and are more accurate then both thermistors and thermocouples in general. Our PT100 sensors are also very easy to handle, being of a metal cartridge construction that is secured with a set screw, no more fiberglass sleeving or clamping washer.

If you want experiment with printing the crazy high temperature materials, get more accurate temperature readings, and have a much more robust and easy to assemble temperature sensor then a PT100 is an ideal option.

This is a kit that provides everything you need to get up and running with a PT100 sensor on most machines. Requires a controller board that is running Marlin or Repetier with a spare analog input pin.

This kit contains a PT100 sensor, a heater block that is compatible with that sensor, an electrical amplifier board to connect the PT100 to your printer controller board, and the required screws for holding everything together. This kit is compatible with all E3D HotEnds except for Cyclops and Volcano.

 

This is a replacement HeatBreak for E3D-v6 1.75mm Universal HotEnds. 

Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve relliability on retractions. 


Compatibility

  • This v6 HeatBreak is not compatible with it's v5 predecessor on the cold side (i.e. the heatsink). 
- See more at: http://e3d-online.com/v6-Heat-Break-1.75mm?search=heatbreak#sthash.EN8X5LN1.dpuf

This is a replacement HeatBreak for E3D-v6 1.75mm Universal HotEnds. 

Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve relliability on retractions. 


Compatibility

  • This v6 HeatBreak is not compatible with it's v5 predecessor on the cold side (i.e. the heatsink). 
- See more at: http://e3d-online.com/v6-Heat-Break-1.75mm?search=heatbreak#sthash.bsTsGi6y.dpuf

This is a replacement HeatBreak for E3D-v6 1.75mm Universal HotEnds. 

Since v5, the manufacturing processes for all our HeatBreaks has been overhauled to achieve a better internal surface finish than ever before. The improved internal surface finish will help to reduce extrusion force and improve relliability on retractions. 


Compatibility

  • This v6 HeatBreak is not compatible with it's v5 predecessor on the cold side (i.e. the heatsink). 
- See more at: http://e3d-online.com/v6-Heat-Break-1.75mm?search=heatbreak#sthash.bsTsGi6y.dpuf

We Also Recommend