ColorFabb XT filament
Color is important for most 3d printing projects, which is why we’ve decided to bring color to our ColorFabb_XT line of filament! The colorFabb_XT co-polyester range, made with Eastman Amphora™ 3D polymer, is now available in many vibrant colors. We’ve selected these colors carefully and are sure these will help create better looking colorFabb_XT co-polyester prints
In addition to the unique properties of the material, this filament is made to extremely high quality standards. Diameter is maintained at 1.75mm +/- 0.05mm with many operators reporting no measurable variation in diameter.
Each spool contains a minimum of 700g filament neatly wound onto a large diameter spool.
Advised 3D printing temperature:
Advised 3D print speed:
40 - 70 mm/s
Advised Heated bed
For ColorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.
ColorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion
We Also Recommend