Cart 0

ColorFabb nGen filament

  • $ 38.95

   nGen is produced with Amphora™ AM3300 polymer and uses specific colorFabb developed color concentrates for good opaque quality and highest possible brightness. Eastman Amphora™ AM3300 3D polymer is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range.

Amphora AM3300 has good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make AM3300 more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

Amphora AM3300 can be made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items.

In addition to the unique properties of the material, this filament is made to extremely high quality standards. Diameter is maintained at 1.75mm +/- 0.05mm with many operators reporting no measurable variation in diameter.

Each spool contains a minimum of 750g filament neatly wound onto a large diameter spool.



At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Advised 3d printing temperature:

Advised 3D print speed:
40 - 70 mm/s

Advised Heated bed:

Build platform:
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

We Also Recommend