Tiertime Dual Extrusion is Here! Welcome the UP300D.

3D Printing Community update, Product update -

Tiertime Dual Extrusion is Here! Welcome the UP300D.


UP 300D

Dual Extrusion Made Easy

Meet the UP 300D

The UP300D is the latest of Tiertime’s 3D printers designed with professionals in mind. It offers high precision, ease-of-use, and superior performance. Applications include: engineering, prototyping, short-run production, one-off fabrication, medical, dental, R&D, education, architecture and industrial tooling.

Convergence Dual Extruder

Tiertime’s all-new Convergence extruder performs dual extrusion via twin direct-drive filament paths feeding a single nozzle. With no need to align two nozzles, water-soluble or breakaway material can be used for easy support removal from complex parts.

Heated Filament Compartment

Filament spools are kept at a steady 55°C by an internal filament compartment heater. This keeps filaments dry, ensures water-soluble material lifespan, and maximizes print quality and reliability.

Powerful Software Package

Up Studio 3.0 is a dedicated software package and state-of-the-art slicing engine developed for Tiertime machines. It supports both dual and single material printing and offers granular print parameter control at every possible level. Within a single print job, multiple models can be printed with different settings and each model can have designated sections with their own settings. Alternatively, operate in Basic mode for a plug ‘n play experience.

Adaptive Layer Thickness

The UP300D can increase print speed by printing smaller layers only where they are required to produce fine detail. Different layer height variation ranges can be applied on a per model or per section basis.


Connectivity options include Wi-Fi, Ethernet, USB cable, and USB memory stick. Multiple users on a network can send tasks to the printer, which can be monitored and managed via the Tiertime Print Queue.

Dual Air Filtration

The UP300D incorporates Tiertime’s two-stage HEPA and activated carbon air filtration system, providing maximum UFP and VOC reduction for a safe operating environment.

Optional Filament Dryer

The Tiertime Dryer helps maintain a pure material state by removing air-induced moisture from filament prior to 3D printing or sealed storage. It features a two-spool capacity, a 48-hour timer, and an adjustable temperature range from 35°C to 75°C.



Printing Technology  MEM  (Melted Extrusion Modelling)
Extruder Convergence Dual/Single
Nozzle Diameter 0.2mm, 0.4mm, 0.6mm, and 0.5mm
Extruder Maximum Temperature 299℃
Extruder Maximum Travel Speed 200 mm/sec
XYZ Accuracy 7, 7, 1.5 micron
Connectivity USB Cable, Wi-Fi, LAN and USB Stick
Touch Screen 4.3″ Full Colored LCD Screen/Linux Board
Build Volume Single:205 × 255 × 225 mm (8″ x 10″ x8.8″)(XYZ)
Double:180 × 235 × 225 mm (7″ x 9,3″ x8.8″)(XYZ)
Printed Object Accuracy ±0.1mm/100mm
Layer Resolution 0.05/0.1/0.15/0.2/0.25/0.3/0.35/0.4mm/User Defined
Calibration and Levelling Automatic/Manual
Print Surface Perf Glass or Flex Glaess,Heated
Dual Filtration System HEPA and Actived Carbon Filters
Pause to Change Filament Type Yes
Filament UP Fila ABS,  ABS+,  PLA, PETG, TPU and more
Filament Diameter 1.75mm
Filament Spool Compatibility 500 – 1000g
Extra USB Input for Add-on 5V,1A
Compatible with 3rd Party Filament Yes


   For more information regarding the new Tiertime UP300D dual extrusion printer, please contact us at: 



Leave a comment

Please note, comments must be approved before they are published

Liquid error (layout/theme line 134): Could not find asset snippets/spurit_uev-theme-snippet.liquid